Fresco Lime Paint
About
Fresco is a 100% mineral and very environmentally friendly lime paint. The appearance is determined by the method of application and the conditions under which the paint is applied.
Lime paint is anti-bacterial and anti-fungal, air-purifying, hygienic, CO2 absorbent and absorbs nitrogen gases.
Application
Fresco lime paint can only be used indoors.
Prepare well before you start painting. Then apply a layer of WallPrim Pro, let it dry and continue with 2 layers of Fresco lime paint. You can apply Fresco lime paint with the special Fresco Pro Lime Brush. This is a nice big block brush which spreads the paint well over the wall.
In addition to using the Fresco Pro Lime brush, you can also choose to apply lime paint with a clean, grease-free cotton cloth. By moving the canvas over the wall in loose movements, you rub the lime paint on it, as it were, this gives a unique look.
Characteristics
- Water-based
- Coloured with natural and organic pigments
- Lime matte effect
- Colour nuances
- Very environmentally friendly
- 100% recyclable
- High coverage
- Water vapour permeable
- VOC free
- Solvent free
- Tension free
- No synthetic binders
- Bacteria and mold repellent
- Non-flammable
- Little to no odour
Applicable to
Painted walls, newly plastered walls, (non-woven) wallpaper, lime plaster, cement plaster, absorbent natural stone, masonry, aerated concrete, plasterboard, plaster blocks, wood, 100% mineral surfaces and other mineral surfaces.
Finish off
Lime paint is very porous and cannot be washed off, so it will quickly absorb water and grease. Direct water and/or condensation can leave traces of water. Fresco can be protected with Dead Flat Eco Sealer. Note: Applying too thick layers, or irregular application, can lead to white haze (especially on dark colours). You must allow a drying time of at least 7 days for the Fresco before the Dead Flat Eco Sealer can be applied. Always read the technical data sheet of the relevant product before use.